Publish Time: 2022-03-11 Origin: Site
Electric toothbrush is a tool for cleaning teeth. Reasonably using electric toothbrush can better care for the health of teeth and promote blood circulation of gums, which is more conducive to the absorption of drugs.The electric toothbrush consists of a dry battery, a miniature DC motor, a battery box, a toothbrush head, a metal guard plate and a sleeve. It belongs to electronic products, which means that the electric toothbrush will also fail.So what are the two common problems with electric toothbrushes?Let's take a look.
Electric toothbrushes have become more and more popular than regular toothbrushes because of their better cleaning ability and longer service life.But most items put for a long time will appear problems, electric toothbrush put for a long time, there may be mildew, battery loss and other problems.But with good daily care, electric toothbrushes can solve most of their problems.So how to solve the problem of moldy electric toothbrush and battery loss?How should electric toothbrush daily maintenance?
The battery installed in reverse if just bought the electric toothbrush press the open button no reaction, may be the battery installed in reverse, carefully check the positive and negative of the battery, generally installed in the battery area will have a prompt battery positive and negative.2, the battery is dead may be because the electric toothbrush has not been charged for a long time, if it is the use of battery electric toothbrush, it should be the battery is dead, remember to charge the electric toothbrush or replace the battery.3. The rotating area is stuck. If it is because the connection between the toothbrush head and the electric toothbrush is stuck, remove the toothbrush head to see if it can rotate.4. If the switch or internal components are damaged, it is not recommended to repair the electric toothbrush, or send it to the after-sales service for repair. If you do not want to repair, you can only buy an electric toothbrush.
electric toothbrush moldy how to do?1. Dilute bleach or 84 disinfectant into the pot to soak the brush handle, do not need too much, can cover one side of the plaque as the standard, soak for a period of time, remember to turn over and then soak, take out after drying can be basically eliminated.2. Spray the bleach on the paper towel and wrap it around the moldy black spots. After a few hours, the black spots will disappear.3, electric toothbrush charging problem 1, nickel cadmium battery 1) to avoid too long charging battery overcharging will heat, but lead to reduced power.2) to avoid a short time to electric toothbrush charging several times after charging and charging again, will make the battery voltage plummet.3) To avoid the "memory effect" caused by the incomplete charging of the battery, which cannot fully release the electric energy.2, lithium battery, can be charged immediately.But don't overdo it, just in case.General use of lithium battery electric toothbrush, full battery cycle will be in 8-10 hours.So if you find yourself running low on battery during use, plug it in before you go to bed and get up the next day just in time to use your electric toothbrush.