Publish Time: 2021-06-04 Origin: Site
A guide to the use of water flosser, and maintenance precautions.
Many partners just bought water flosser, do not know how to install water flosser, how to use water floss, and how to maintain water flosser in the late stage.Refer to the product manual of water flosser to explain the use of water flosser and maintenance skills.
Installing of water flosser. First step: insert the nozzle at the clamp position, hold the nozzle and rotate it counterclockwise by 60°, so that the nozzle is fixed in the direction of the button. Second step: take out the hose from the water pipe winding device, insert one end of the hose into the handle. Third step: fill the water container arbitrarily with the suction board.
Instructions for the use of water flosser:
1. Open the water tank cover, fill the water tank with the temperature of no more than 40C, and then close the water tank cover.For the first time, please add a small amount of water to the outlet.
2. Hold the fuselage of the water flosser with the left hand and the water tank with the right hand. At the same time, rotate counterclockwise and pull down to remove and install the water tank.
3. Insert the nozzle into the middle hole of the water flosser machine until it clicks, and then the installation is successful.To replace or remove the sprinkler head, press the button to remove the sprinkler head and remove the sprinkler head.
4. Bend over the lavatory basin, press the mode button, set the pressure of water flosser to the required position, put the nozzle into the mouth and aim at the gums and teeth, press the switch button to start the machine and use it.
5. To achieve the best results, using the water flosser to start at the molar area (back teeth) and clean the spray head in the direction of the incisors. Move the spray head along the gum line and pause briefly between the teeth.Be sure to clean around the gums and between the teeth.
6. Precautions for the use of water flosser: 1. Please read the instructions carefully before using the product.2. Do not rinse water flosser with water.3. Make sure the water flosser is dry.4. Water floss cleaning and maintenance 1. water flosser must be closed when cleaning.2, regular cleaning water flosser can ensure better teeth cleaning effect.3. For more detailed cleaning instructions, please refer to the product manual.
When you water flosser for the first time, it hurts and bleeds very badly.Finally, I figured out how to use it comfortably, and the trick was to hold a mouthful of water.Fill the lid with water before flossing, then take a small amount of water (about the same amount as a mouthwash), then turn the water flosser nozzle in one direction, know it, reach into your mouth, and close your mouth.To feel water flosserthe nozzle is in the water, place it gently against the inside of your teeth.Be sure to stick to your teeth + soak in water, and then turn on a gear.It won't hurt at all!!Then just like brushing your teeth, you can feel the water coming straight into your teeth.